
This is a recent job from the Springfield area: an LG dryer that still turned on and tumbled, but had stopped heating.
What the customer told us
The dryer ran normally but the clothes came out as wet as they went in. It had stopped heating.
The appliance
An LG electric dryer in a home laundry room, next to a front-load washer.
What we found
The heating element assembly had failed, so the dryer could turn the drum and run the fan but couldn’t make heat. A failed element is one of the most common reasons an electric dryer runs cold.
What we did
We took the dryer apart, replaced the heating element assembly and put it back together.
The result
The dryer was back in service with a new heating element. Every repair comes with a 90-day warranty on parts and labor.
If your dryer runs but won’t heat
On an electric dryer the usual suspects are the heating element, a thermal fuse, a high-limit thermostat or a tripped breaker on one leg of the 240-volt circuit. A blocked vent can cause the same symptom by tripping a safety part. Our guide to a dryer that runs but won’t heat walks through the checks you can do first.
Frequently asked questions
Quick answers to the questions we hear most about this problem.
Can I keep using a dryer that won’t heat?
It won’t do any harm to the clothes, but it won’t dry them either. If it smells hot or burnt, stop using it and call.
Is a heating element worth replacing?
Usually, yes. It’s a common, moderate repair, and it’s much cheaper than a new dryer.
Related services
Need a hand with it? Alliance Appliance Services diagnoses first and explains the repair before any work starts. Call (571) 303-8548 or request a repair online. We serve Springfield, Alexandria, Fairfax, Arlington and communities across Virginia, Maryland and Washington, DC.
