You start the dishwasher, it hums for a minute, and the display shows E15. You may hear the drain pump running while nothing is washing. That code is not a random glitch. The dishwasher has found water where it should never be and shut itself down to protect your floor.
Here is what E15 means, where the water usually comes from, what you can check yourself, and why the real repair is finding the leak.
What E15 actually means
Under the tub of a Bosch dishwasher is a shallow base pan. Water that leaks anywhere inside the machine runs down into it. A foam float sits in the pan, and when enough water collects, the float rises and trips a switch. That is the water protection system, sold as AquaStop on many models.
Once the switch trips, the control shows E15, pumps out the tub and refuses to start a cycle until the pan is dry and the float drops back down.
Where the water usually comes from
The code tells you there is water in the pan, not how it got there. These are the usual sources:
- A hose or connection. A loose clamp, a split hose or a worn fitting inside the machine can drip for weeks before the pan fills.
- A pump seal. When the seal on the wash pump or drain pump wears, water seeps out every time the pump runs.
- A door seal. A torn or shifted gasket, or a worn seal along the bottom of the door, lets water escape at the front of the tub and down into the pan.
- Oversudsing. Hand dish soap, too much detergent or spilled rinse aid fills the tub with foam that pushes past the seals. This cause often needs no parts at all.
- A cracked part. The sump, a fitting or, on some models, a water tank on the side of the tub can crack with age and leak only when the machine is full.
What you can safely do
A few checks need no tools. If none of them explains the water, stop there and call.
- Turn it off. If the drain pump keeps running nonstop or there is water on the floor, switch off the breaker (or unplug it under the sink) and close the water supply valve.
- Look for suds. If the tub is full of foam, scoop out what you can and wipe the tub. Once the code clears, run a short rinse with no detergent.
- Check the floor. Use a flashlight along the toe kick and in the sink cabinet where the hoses connect. Water there is worth mentioning when you call.
- Clean the filter. Twist out the round filter at the bottom of the tub, rinse it and the flat screen under it, and check the sump for glass or food.
- Don’t tip or shake it. Online advice often says to tilt the dishwasher back to drain the pan. Unless you know exactly what you are doing, don’t. It is screwed to the counter with hoses and wiring attached, and tipping it can pull a connection loose or splash water onto electrical parts.
- Don’t keep restarting it. If the code clears, the next cycle sends water straight back through the leak.
Why drying the pan is not the fix
Once the pan dries, the float drops and the code clears. Some people speed this up with a towel through the kick plate or a fan pointed underneath. The machine runs again, but the leak is still there and the code returns after a cycle or two.
Meanwhile a slow leak soaks the subfloor and cabinet sides long before it shows, and hardwood next to a dishwasher stains and cups easily. The repair is finding the source, not clearing the code. If water is already reaching the floor, see our page on a dishwasher leaking.
E24 and E25: the related drain codes
Two other Bosch codes involve water that isn’t going where it should. Neither one means a leak, but a dishwasher that won’t drain can overflow or foam up. Our guide to a dishwasher not draining has more detail.
- E24. Water isn’t draining, usually because the drain hose is kinked or the filter is blocked. Clean the filters and check the hose, including where it meets the garbage disposal.
- E25. The drain pump is blocked, often by glass, a fruit pit or a label. On many models a small cover in the sump, under the filters, gives access to the pump.
How a technician finds the leak
Finding the leak usually means removing the kick plate or easing the dishwasher out of its opening to see the base. We dry the pan, run water through the machine and watch where it appears. Mineral trails often show the path first.
The fix is usually one part: a hose, a clamp, a pump seal or pump, a door seal or a cracked tank. You get the price before any work starts, our $75 diagnostic fee goes toward the repair if you go ahead, and every repair carries a 90-day warranty on parts and labor. Read about our Bosch appliance repair or request a repair online.
Frequently asked questions
Quick answers to the questions we hear most about this problem.
Will E15 clear if I turn the dishwasher off and back on?
Not while there is water in the base pan. The float has to drop first. Once the pan dries the code may go away, but the leak is still there.
Is it safe to keep using my Bosch after E15 goes away?
We don’t recommend it. Running it without finding the leak puts more water under the dishwasher, where it damages the floor and cabinets out of sight.
Can regular dish soap cause E15?
Yes. Hand dish soap makes far more foam than dishwasher detergent, and the suds push past the seals into the base pan. Clearing the suds and letting the pan dry often solves it.
What does an E15 repair cost?
It depends on what is leaking. A loose clamp is a small job, while a pump or a cracked tank costs more. Either way, you get the price before we start.
Related services
Need a hand with it? Alliance Appliance Services diagnoses first and explains the repair before any work starts. Call (571) 303-8548 or request a repair online. We serve Springfield, Alexandria, Fairfax, Arlington and communities across Virginia, Maryland and Washington, DC.
